Influence of manufacturing parameters on the crackling process of ancient Chinese glazed ceramics
Influence of manufacturing parameters on the crackling process of ancient Chinese glazed ceramics
复制标题
DOI：
10.1016/j.culher.2014.10.003
复制
发表时间：
2015-07-01
影响因子：
3.1
通讯作者：
Li, Weidong
中科院分区：
文献类型：
--
作者：
Lahlil, Sophia;Xu, Jiming;Li, Weidong
产生于宋代(公元960-1279年)的官阁瓷器在中国陶瓷史上具有非常特殊的地位，因为它们的审美品质，唯一的装饰特征就是突出的爆裂声。这项跨学科研究的目的是为了了解中国古代釉面陶瓷中裂纹的形成规律，以获得对制造工艺的了解。我们提出了一种新的方法，基于对控制条件下合成的釉面陶瓷模型系统的裂纹过程和裂纹形态的时间尺度研究。为了建立宏观和微观性能之间的联系，进行了EDXRF、X射线衍射和扫描电子显微镜-能谱分析。结果表明，釉体相对厚度、烧成温度和气氛是控制裂纹形态的关键因素。(C)2014年爱思唯尔·马森公司。版权所有。
Guan and Ge wares, produced during the Song Dynasty (960-1279 AD), hold a very special position in Chinese ceramic history because of their aesthetical qualities with a prominent crackle as their only decorative feature. The aim of this inter-disciplinary research is to understand the formation of crack patterns in ancient Chinese glazed ceramics in order to gain knowledge on the manufacturing process. We propose a new approach based on a time-scale investigation of the crackling process and of the cracks morphology obtained on glazed ceramic model systems synthesized under controlled conditions. In order to establish a link between macroscopic and microscopic properties, EDXRF, XRD and SEM-EDX analyses have been performed. Our results show that the relative glaze-body thickness and the firing temperature and atmosphere are key factors to control the crack patterns morphology. (C) 2014 Elsevier Masson SAS. All rights reserved.