A Micromegas-based telescope for muon tomography: The WatTo experiment
A Micromegas-based telescope for muon tomography: The WatTo experiment
复制标题
DOI:
10.1016/j.nima.2016.08.002
复制
发表时间:
2016-10
影响因子:
1.4
通讯作者:
S. Bouteille;D. Attié;P. Baron;D. Calvet;P. Magnier;I. Mandjavidze;S. Procureur;M. Riallot;M. Winkler;Mpgd Micromegas;Muon Tomography;Volcanology Muography
中科院分区:
文献类型:
--
作者:
S. Bouteille;D. Attié;P. Baron;D. Calvet;P. Magnier;I. Mandjavidze;S. Procureur;M. Riallot;M. Winkler;Mpgd Micromegas;Muon Tomography;Volcanology Muography
This paper reports about the first Micromegas-based telescope built for applications in muon tomography. The telescope consists of four, 50×50 cm2resistive multiplexed Micromegas with a 2D layout and a self-triggering electronics based on the Dream chip. Thanks to the multiplexing, the four detectors were readout with a single Front-End Unit. The high voltages were provided by a dedicated card using low consumption CAEN miniaturized modules. A nano-PC (Hummingboard) ensured the HV control and monitoring coupled with a temperature feedback as well as the data acquisition and storage. The overall consumption of the instrument yielded 30 W only, i.e. the equivalent of a standard bulb. The telescope was operated outside during 3.5 months to image the water tower of the CEA-Saclay research center, including a 1.5-month campaign with solar panels. The development of autonomous, low consumption muon telescopes with unprecedented accuracy opens new applications in imaging as well as in the field of muon metrology.