Microstructure and mechanical properties of the rheoformed cylindrical part of 7075 aluminum matrix composite reinforced with nano-sized SiC particles
Microstructure and mechanical properties of the rheoformed cylindrical part of 7075 aluminum matrix composite reinforced with nano-sized SiC particles
复制标题
纳米SiC颗粒增强7075铝基复合材料流变圆柱件的显微组织与力学性能
DOI：
10.1016/j.matdes.2015.04.040
复制
发表时间：
2015-08
影响因子：
8.4
通讯作者：
Wang Ying
中科院分区：
文献类型：
--
作者：
Jiang Jufu;Wang Ying
The microstructure and mechanical properties of the rheoformed parts of 7075 aluminum matrix composite were investigated. The results show that more liquid phase and spheroidal solid grains were found in the microstructures in the top and medium regions of the side wall of the rheoformed parts due to dependence of the deformation on liquid flow and flow of liquid incorporating solid grains. Yield strength and ultimate tensile strength of the rheoformed composite parts are enhanced as compared with the as-extruded and the rheoformed parts of 7075 matrix alloy. The yield strength, ultimate tensile strength and elongation of the rheoformed composite parts with T6 reach 399 MPa, 492 MPa and 9.6%, respectively. When stirring time increases from 5 min to 20 min, the mechanical properties increased due to fine-grained strengthening and a further increase more than 20 min led to a slight change. Pressure led to a significant increase of the mechanical properties due to some reduction of defects and dislocations strengthening. An increase of SiC volume fraction from 0.5% to 1% led to an improvement of yield strength and ultimate tensile strength and a further increase led to a decrease.
登录
查看更多内容
影响因子：
6.3
作者：
Yufeng Wu;G. Kim
通讯作者：
Yufeng Wu;G. Kim
影响因子：
6.2
作者：
S. Sajjadi;M. T. Parizi;H. Ezatpour;A. Sedghi
通讯作者：
S. Sajjadi;M. T. Parizi;H. Ezatpour;A. Sedghi
DOI：
10.1016/j.proeng.2013.12.166
发表时间：
2013
期刊：
Procedia Engineering
影响因子：
--
作者：
K. S. Alhawari;M. Z. Omar;M. Ghazali;M. S. Salleh;M. Mohammed
通讯作者：
K. S. Alhawari;M. Z. Omar;M. Ghazali;M. S. Salleh;M. Mohammed
DOI：
10.1016/s1003-6326(11)61171-0
发表时间：
2012-02
影响因子：
4.5
作者：
A. Mazahery;M. Shabani
通讯作者：
A. Mazahery;M. Shabani
DOI：
10.1016/j.msea.2004.05.004
发表时间：
2005-01-15
影响因子：
6.4
作者：
Chayong, S;Atkinson, HV;Kapranos, P
通讯作者：
Kapranos, P