About the possibility of defining a standard method for iron loss measurement in soft magnetic materials with inverter supply
About the possibility of defining a standard method for iron loss measurement in soft magnetic materials with inverter supply
复制标题
关于定义逆变电源软磁材料铁损测量标准方法的可能性
DOI：
10.1109/ias.1996.560184
复制
发表时间：
1996
期刊：
影响因子：
--
通讯作者：
M. Pastorelli
中科院分区：
文献类型：
--
作者：
A. Boglietti;P. Ferraris;M. Lazzari;M. Pastorelli
由于由静电转换器供电的电磁和机电设备的增加，对非正弦供电的软磁材料的能量特性的分类和评价变得越来越重要。本文分析了为单位质量铁损(单位质量铁损)制定一种标准方法的可能性，并对静态供应进行了分析。本文特别强调了用非正弦源进行标准磁测量时可能会发现的主要问题。由于作为电源的PWM逆变器是一种工业标准解决方案，因此使用常见的磁性材料并考虑逆变器特性的影响，例如调制指数、开关频率、调制技术，对问题进行了分析。此外，本文还提出了一种标准试验台的基本结构，并考虑了所需的仪器。
Due to the increase of electromagnetic and electromechanical devices supplied by static converters, the classification and evaluation of energetic behaviour of soft magnetic materials, with nonsinusoidal supply, is becoming mandatory. In this paper the possibility of defining a standard methodology for the specific iron loss measurement (iron losses per mass unity), with static supply, is analyzed. In particular the paper underlines the main problems which can be found when standard magnetic measurements are carried out with nonsinusoidal sources. Since PWM inverters represent an industrial standard solution as supply source, the problem is analyzed using common magnetic materials and taking into account the effects due to the inverter characteristics, as an example modulation index, switching frequency, modulation technique. In addition in the paper a basic structure of a standard test bench is proposed, also taking into consideration the required instrumentation.