Needle-Shaped WO3 Nanorods for Triethylamine Gas Sensing
Needle-Shaped WO3 Nanorods for Triethylamine Gas Sensing
复制标题
用于三乙胺气体传感的针状 WO3 纳米棒
DOI:
10.1021/acsanm.0c01731
复制
发表时间:
2020-09-25
影响因子:
5.9
通讯作者:
Feng, Liang
中科院分区:
文献类型:
--
作者:
Hu, Qi;He, Jiaqi;Feng, Liang
The accurate and rapid monitoring of triethylamine (TEA) is highly desired for human health, environmental protection, and food safety. Herein, we have fabricated a WO3 sample with a morphology of needle-shaped nanorods via a simple hydrothermal method and subsequent calcination. The WO3 needle-shaped nanorods with 5 mu m length and 400 nm diameter possess a uniform and homogeneous morphology, which avails large-scale industrialization. The sensing based on needle-shaped WO3 nanorods exhibits an ultrasensitive response to TEA, with a response up to 6.7 toward 1 ppm TEA at 250 degrees C. The outstanding selectivity and repeatability are observed as well. The excellent sensing performance is tentatively attributed to the uniform and large-scale morphology, highly active C-N bonds in TEA, and the effective interaction between WO3 and TEA. Furthermore, the sensor is directly employed to monitor the TEA given off from a grass carp in 48 h, and a good linearity (R-2 = 0.996) between the response and preserving time is obtained, proving its promising prospect in daily use. The architecture strategy opens an available route for large-scale practical fabrication of WO3 needle-shaped nanorods, and it is a pioneering attempt to apply the sensor for trace TEA detection in marine food safety testing.