Amorphous silicon solar cell on textured tempered glass substrate prepared by sandblast process
Amorphous silicon solar cell on textured tempered glass substrate prepared by sandblast process
复制标题
喷砂工艺制备的纹理钢化玻璃基板上的非晶硅太阳能电池
DOI：
10.1016/s0927-0248(97)00182-7
复制
发表时间：
1997
影响因子：
6.9
通讯作者：
T. Tomita
中科院分区：
文献类型：
--
作者：
H. Taniguchi;H. Sannomiya;K. Kajiwara;K. Nomoto;Y. Yamamoto;K. Hiyoshi;H. Kumada;M. Murakami;T. Tomita
研究了喷砂玻璃的表面形貌、光学性能以及在其上制备的非晶硅太阳能电池的光伏性能。结果表明，电池性能与玻璃基板的表面微观粗糙度有关，特别是短周期起伏和表面分形维数。由此得到短路电流为14.26mA/cm2、效率为8.00％的钢化玻璃基板上的非晶硅太阳能电池。
The surface morphology and the optical property of sandblasted glasses and the photovoltaic property of amorphous-silicon solar cells fabricated on them were investigated. The results suggest that the cell performance is related to the surface micro roughness of glass substrate, especially the short period undulation and the surface fractal dimension. Consequently, the amorphous-silicon solar cell on the tempered glass substrate which had the short-circuit current of 14.26 mA/cm2and the efficiency of 8.00% was obtained.