Hardening of SS316 Stainless Steel Caused by the Irradiation with Argon Ions
Hardening of SS316 Stainless Steel Caused by the Irradiation with Argon Ions
复制标题
SS316不锈钢的氩离子辐照硬化
DOI：
10.1007/s11003-016-9967-4
复制
发表时间：
2016
影响因子：
0.9
通讯作者：
I. E. Kopanets
中科院分区：
文献类型：
--
作者：
S. Karpov;G. Tolstolutskaya;B. S. Sungurov;A. Y. Rostova;G. Tolmacheva;I. E. Kopanets
研究了300和900°K下，1.4MeV Ar+离子辐照SS 316不锈钢，剂量范围为0-25 dpa，辐照硬化与显微组织演变之间的相关性。结果表明，在这些剂量下达到的硬化程度可高达75%，并在2 dpa时观察到其饱和。尺寸小于15 nm的缺陷和位错环团对辐射诱导硬化起主要作用。
We study the correlation between the radiation-induced hardening and the evolution of microstructure of SS316 stainless steel irradiated with 1.4 MeV Ar+ ions within the dose range 0–25 dpa at 300 and 900°K. It is shown that the degree of hardening attained under these doses can be as high as 75% and its saturation is observed at 2 dpa. The clusters of defects and dislocation loops with sizes smaller than 15 nm make the principal contribution to the radiation-induced hardening.
具有表面检测、夹持力控制系统的 AFM 镊子
DOI：
--
发表时间：
2008
期刊：
影响因子：
--
作者：
T. Umemoto;K. Ayano;M. Suzuki;M. Yasutake;T. Konno;G. Hashiguchi
通讯作者：
G. Hashiguchi