Influence of polishing of denture base resin and metal surfaces on wettability with water and saliva
Influence of polishing of denture base resin and metal surfaces on wettability with water and saliva
复制标题
DOI：
10.4012/dmj.25.161
复制
发表时间：
2006-03-01
影响因子：
2.5
通讯作者：
Fujii, Hiroyuki
中科院分区：
文献类型：
--
作者：
Nishioka, Masamichi;Yamabe, Yoshihisa;Fujii, Hiroyuki
本研究的目的是研究义齿基托树脂和金属的表面粗糙度对水和唾液润湿性的影响。使用热固化义齿基托树脂和钴铬合金制作实体样本。将这些材料聚合或铸造后，使用抛光纸（#240、#400 和 #1,000）和棉轮进行渐进式抛光工艺，生产出具有四种不同类型表面粗糙度的样品。随着抛光工艺的进行，表面粗糙度显着下降（p
The purpose of this study was to investigate the influence of the surface roughness of denture base resin and metal on wettability with water and saliva.Solid specimens were produced using heat-curing denture base resin and Co-Cr alloy. After polymerizing or casting these materials, specimens with four different types of surface roughness were produced by a progressive polishing process using polishing papers (#240, #400, and #1,000) and cotton buffs.Surface roughness decreased significantly as the polishing process progressed (p