Measurements of Surface Texture Parameters After Ultrasonic Assisted and Conventional Grinding of ZrO2 Based Ceramic Material Characterized by Different States of Sintering

Measurements of Surface Texture Parameters After Ultrasonic Assisted and Conventional Grinding of ZrO2 Based Ceramic Material Characterized by Different States of Sintering
复制标题

DOI：
10.1016/j.procir.2016.06.049
复制
发表时间：
2017
期刊：
Procedia CIRP
影响因子：
--
通讯作者：
Roman Wdowik;J. Porzycki;M. Magdziak
Roman Wdowik;J. Porzycki;M. Magdziak
中科院分区：
其他
文献类型：
--
作者：
Roman Wdowik;J. Porzycki;M. Magdziak

文献摘要

被引文献

相似文献

文章介绍了 ZrO2 基陶瓷材料超声辅助磨削（UAG）和常规磨削（CG）后表面织构参数的测量结果。机加工样品的特征在于不同的烧结状态。采用超声波20直线机床和两种不同的金刚石磨销来加工陶瓷样品。使用 Infinite Focus Real 3D 显微镜（光学焦点变化技术）和 3D 扫描仪 Talyscan（接触式测量）进行表面粗糙度测量并计算参数值。对测量结果进行分析，以说明加工条件对表面纹理参数的影响。
The article presents the results of measurements of surface texture parameters after ultrasonic assisted grinding (UAG) and conventional grinding (CG) of ZrO2based ceramic material. The machined samples are characterized by different states of sintering. Ultrasonic 20 linear machine tool and two different diamond grinding pins were applied to machine ceramic samples. Surface roughness measurements were performed and the values of parameters were computed using Infinite Focus Real 3D microscope (optical focus-variation technique) and 3D scanner Talyscan (contact measurement). The results of measurements were analyzed in order to state the influence of machining conditions on surface texture parameters.