Composite materials for microwave devices using additive manufacturing
Composite materials for microwave devices using additive manufacturing
复制标题
使用增材制造的微波设备复合材料
DOI：
10.1049/el.2016.0078
复制
发表时间：
2016
影响因子：
1.1
通讯作者：
Bukhari S
中科院分区：
文献类型：
--
作者：
Bukhari S
增材制造已经与市售的RF材料相结合，以合成相对介电常数可以控制的复合材料。还提出了预测这些复合材料的有效介电常数的设计方程。通过制作贴片天线测量了复合材料的相对介电常数。已经证明，通过使用Taconic，聚乳酸（PLA）和空气，三种具有不同介电常数的材料，可以实现从1.47到6.00的大的且几乎连续的相对介电常数值范围。
Additive manufacturing has been combined with commercially available RF materials to synthesise composite materials whose relative permittivity can be controlled. A design equation for predicting the effective permittivity of these composite materials has also been presented. The relative permittivity of the composite materials was measured by fabricating patch antennas using these materials as the substrate. It has been demonstrated that by using Taconic, polyactic acid (PLA) and air, three materials with different dielectric constants, a large and nearly continuous range of relative permittivity values, from 1.47 to 6.00, can be realised.
用于局部介电常数三维控制的增材制造异质基板
影响因子：
1.1
作者：
J. Tribe;W. Whittow;R. Kay;J. Vardaxoglou
通讯作者：
J. Vardaxoglou
织构介电基板上孔径耦合微带贴片天线的设计方法
影响因子：
5.7
作者：
D. Psychoudakis;Y. Koh;J. Volakis;J. Halloran
通讯作者：
J. Halloran