Application of MCFCs for active CO2 capture within natural gas combined cycles
Application of MCFCs for active CO2 capture within natural gas combined cycles
复制标题
DOI:
10.1016/j.egypro.2011.01.179
复制
发表时间:
2011
期刊:
影响因子:
--
通讯作者:
S. Campanari;P. Chiesa;G. Manzolini;A. Giannotti;F. Federici;P. Bedont;F. Parodi
中科院分区:
文献类型:
--
作者:
S. Campanari;P. Chiesa;G. Manzolini;A. Giannotti;F. Federici;P. Bedont;F. Parodi
This paper presents an analysis of the application of Molten Carbonate Fuel Cells (MCFC) in a natural gas fired combined cycle power plant to capture CO2from the exhaust of the gas turbine. The gas turbine flue gases are used as cathode feeding for a MCFC, where CO2is transferred from the cathode to anode side, concentrating the CO2in the anode exhaust. This stream is then sent to a CO2removal section consisting either in (i) an oxygen combustion of residual fuel compounds, or (ii) a cryogenic CO2removal section, cooling the exhaust stream in the heat recovery steam generator. The MCFC is based on Ansaldo Fuel Cells experience, fed with natural gas processed by an external reformer which is thermally integrated within the FC module. Differently from more conventional approaches to CO2capture, it works increasing the plant power output, acting as an active CO2concentrator. The plant shows the potential to achieve a CO2avoided ranging between 58 and 68%, depending on the configuration while taking advantage from the introduction of the fuel cell, the final electric efficiency is lower from 0.2 to 0.8 points lower than the original combined cycle (57.8% LHV in the most efficient configuration). The power output increases by about 22%, giving a potentially relevant advantage with respect to competitive carbon capture technologies.