Utilisation Of Microwave Energy for CO2 Desorption in Post-combustion Carbon Capture Using Solid Sorbents
Utilisation Of Microwave Energy for CO2 Desorption in Post-combustion Carbon Capture Using Solid Sorbents
复制标题
利用固体吸附剂在燃烧后碳捕获中利用微波能量解吸二氧化碳
DOI：
10.1016/j.egypro.2014.11.227
复制
发表时间：
2014
期刊：
影响因子：
--
通讯作者：
Chronopoulos T
中科院分区：
文献类型：
--
作者：
Chronopoulos T
One of the most promising technologies for CO2capture is adsorption using solid sorbents, with the most important advantage being the energy penalty reduction during capture and regeneration of the material compared to liquid absorption. Nevertheless, the challenge in this application remains the same, namely to intensify the production of a high purity CO2stream in terms of adsorption/desorption rates and energy use while preserving the textural characteristics of the sorbents. Towards this target, a new adsorption system is proposed in this research, namely Microwave Swing Adsorption (MSA), which takes advantage of the different heating procedure that electromagnetic energy can provide. Results showed that microwaves are able to enhance the rate of CO2desorption from the sorbent, contributing to a four times faster overall desorption process, compared to conventional heating desorption. It was also proved that the solid sorbent's CO2adsorption capacity is also well preserved, without any significant reduction even after 20 adsorption/desorption cycles.
通过微波加热解吸二氧化碳以捕获燃烧后的碳
影响因子：
5.2
作者：
Chronopoulos T
通讯作者：
Chronopoulos T
影响因子：
3.9
作者：
Wang, M.;Lawal, A.;Ramshaw, C.
通讯作者：
Ramshaw, C.