Investigation of the Forming Behavior of Copper Wires for the Compaction of Windings for Electric Machines
Investigation of the Forming Behavior of Copper Wires for the Compaction of Windings for Electric Machines
复制标题
用于压实电机绕组的铜线成形行为的研究
DOI：
10.4028/p-hhpr62
复制
发表时间：
2022
期刊：
影响因子：
--
通讯作者：
J. Fleischer
中科院分区：
文献类型：
--
作者：
M. Halwas;F. Wirth;J. Fleischer
为了满足对高效电力牵引驱动器日益增长的需求，wbk 生产科学研究所开发了紧凑型卷绕工艺。该工艺链的关键要素之一是圆线定子绕组的压实。为了能够估计影响因素的敏感性，本工作建立了简化的有限元仿真模型。计算中选取导线层数、层结构和冲头行程作为因素，各有3个水平。通过假彩色图像以及槽截面中的最大应变和应力进行评估。
To meet the increasing demand for highly efficient electric traction drives, the compact winding process has been developed at the wbk Institute of Production Science. One key element of the process chain is the compaction of the round wire stator windings. In order to enable an estimation of the sensitivities of the influencing factors, a simplified finite element simulation model was set up in the present work. In the calculations, the number of wire layers, the layer structure and the punch stroke were selected as factors with three levels each. The evaluation was performed by means of false color images and the maximum strains and stresses in the section plane of the slots.
线性线圈绕制工艺中铜线成型和产品性能的开发
DOI：
10.1109/edpc.2017.8328143
发表时间：
2017
期刊：
2017 7th International Electric Drives Production Conference (EDPC)
影响因子：
--
作者：
Komodromos;Löbbe;Tekkaya
通讯作者：
Tekkaya