Influence of Carbon Content on Ceramic Injection Molding of Reaction-Bonded Silicon Carbide
Influence of Carbon Content on Ceramic Injection Molding of Reaction-Bonded Silicon Carbide
复制标题
碳含量对反应烧结碳化硅陶瓷注射成型的影响
DOI：
10.1111/ijac.12570
复制
发表时间：
2016
影响因子：
2.1
通讯作者：
Yu Jincheng
中科院分区：
文献类型：
--
作者：
Zhang Zhao;Zhang Yujun;Gong Hongyu;Guo Xue;Zhang Yubai;Wang Xianli;Yu Jincheng
Reaction‐bonded silicon carbide (RBSC) was prepared by ceramic injection molding (CIM) technique with feedstocks containing silicon carbide (SiC), a wax‐based organic system and different amounts of carbon black. As a critical effect of the reaction sintering process, carbon was introduced from the carbon black and the decomposition product of the organic polymers, respectively. This study described the influence of carbon content on the mixing and injection process firstly and then emphasized the debinding process since it played a large role in the process of the pyrolysis of organic. Results indicated that the preferable thermal debinding was performed in N2and the optimal performance was obtained for RBSC with 7 wt.% of carbon black, with the density of 2.98 g/cm3, apparent porosity of 0.24%, bending strength of 301.59 MPa and fracture toughness of 4.18 MPa·m1/2.
