Position-sensitive detector with microstrip anode for electron multiplication with gases☆
Position-sensitive detector with microstrip anode for electron multiplication with gases☆
复制标题
DOI：
10.1016/0168-9002(88)90970-9
复制
发表时间：
1988-01
影响因子：
1.4
通讯作者：
A. Oed
中科院分区：
文献类型：
--
作者：
A. Oed
一种新型位置敏感探测器已经开发出来。微带阳极取代了通常用于气体电子倍增的导线。固定在玻璃基板上的微带是通过光刻技术生产的。所施加的电势在每个带之间交替。使用配备这种新型阳极的位置敏感中子探测器测得计数率为 2.3 MHz/cm2。微带阳极结合了正比计数器的改进质量和光电倍增管的某些特性。
A position-sensitive detector of a new type has been developed. A microstrip anode replaces the wires generally used for electron multiplication with gases. The microstrips which are fixed on a glass substrate are produced by means of photolithography. The applied electric potential alternates between each strip. With a position-sensitive neutron detector equipped with this new type of anode a counting rate of 2.3 MHz/cm2has been measured. The microstrip anode combines the improved qualities of a proportional counter with certain properties of a photomultiplier tube.