Investigation of a stress based failure criterion for sheet metal
Investigation of a stress based failure criterion for sheet metal
复制标题
基于应力的金属板材失效准则的研究
DOI：
--
复制
发表时间：
2008
期刊：
影响因子：
--
通讯作者：
M. Derov
中科院分区：
文献类型：
--
作者：
M. Derov
INVESTIGATION OF A STRESS BASED FAILURE CRITERION FOR SHEET METAL by Matthew John Derov University of New Hampshire, May, 2008 Tearing failure in sheet metal forming has traditionally been predicted based on the strain state of the material. However, a concern with this failure prediction method is that the strain based forming limit curve exhibits significant strain path dependence. An alternative criterion has been proposed that is based on the stress in the material and has been shown to be less sensitive to the deformation path; however, it has not yet been experimentally validated. An innovative analytical approach to obtaining both a stress and strain based forming limit criterion has been developed. This method not only captures the path insensitivity of the stress based forming limit curve, but also allows for an understanding of why the strain based forming limit curve is path sensitive. The model has shown to match experimental results. In addition, preliminary work has been done on a bi-axial tensile device to validate the model and the path insensitivity of the stress based forming limit criterion. With the completion of this work, it will be clear that the stress based forming limit criterion is the most universal means of failure prediction in sheet forming of complex geometries.
