Fluorescence turn-on detection of iodide, iodate and total iodine using fluorescein-5-isothiocyanate-modified gold nanoparticles

Fluorescence turn-on detection of iodide, iodate and total iodine using fluorescein-5-isothiocyanate-modified gold nanoparticles
复制标题

DOI:
10.1039/b905426j
复制
发表时间:
2009-01-01
期刊:
影响因子:
4.2
通讯作者:
Tseng, Wei-Lung
Tseng, Wei-Lung
中科院分区:
化学2区
文献类型:
--
作者:
Chen, Yi-Ming;Cheng, Tian-Lu;Tseng, Wei-Lung

文献摘要

被引文献

相似文献

使用异硫氰酸荧光素修饰的金纳米颗粒(FITC-AuNPs)实现了I-的选择性开启荧光检测。FITC分子,在碱性溶液中发出强烈的荧光,当它们通过异硫氰酸酯基团附着在金纳米颗粒表面时,会被严重淬灭。当加入I-时,由于I-吸附在AuNPs表面,FITC分子被分离。结果,释放的FITC分子恢复到其原始荧光强度。由于I-对Au表面的结合亲和力高于Br-、Cl-或F-,因此FITC-AuNP对I-的选择性明显高于对这些其他阴离子的选择性。同时,用抗坏血酸将IO 3-还原为I-后,利用FITC-AuNPs成功实现了IO 3-的检测。在最佳pH和AuNP浓度下,使用该探针的I-和IO 3-的最低可检测浓度分别为10.0和50.0 nM。FITC-AuNP提供了许多优点,包括易于制备、选择性、灵敏度和低成本。将该探针应用于食盐和海水中总碘的测定。
Selective turn-on fluorescence detection of I- was accomplished using fluorescein isothiocyanate-decorated gold nanoparticles (FITC-AuNPs). FITC molecules, which fluoresce strongly in an alkaline solution, were severely quenched when they were attached to the surface of AuNPs through their isothiocyanate group. Upon the addition of I-, FITC molecules were detached because of I- adsorption on the surface of AuNPs. As a result, released FITC molecules were restored to their original fluorescence intensity. Because I- has a higher binding affinity to the surface of Au than do Br-, Cl-, or F-, the FITC-AuNPs obviously have a higher selectivity toward I- than toward these other anions. Meanwhile, after IO3- was reduced to I- with ascorbic acid, the detection of IO3- was successfully achieved using the FITC-AuNPs. Under an optimum pH and AuNP concentration, the lowest detectable concentrations of I- and IO3- using this probe were 10.0 and 50.0 nM, respectively. The FITC-AuNPs provide a number of advantages, including easy preparation, selectivity, sensitivity, and low cost. This unique probe was applied to an analysis of the total iodine in edible salt and seawater.