Static properties of fibre metal laminates
Static properties of fibre metal laminates
复制标题
DOI：
10.1023/a:1025569316827
复制
发表时间：
2003-07-01
影响因子：
2.3
通讯作者：
Vermeeren, CAJR
中科院分区：
文献类型：
--
作者：
Hagenbeek, M;Van Hengel, C;Vermeeren, CAJR
本文对金属纤维层压板的静态性能作了简要的综述。从应力-应变关系出发，给出了一种有效的单轴应力-应变曲线计算工具。该方法对所有眩光类型都有效。Norris失效模型与金属体积分数方法相结合，从而成为预测允许钝缺口强度的有用工具。体积分数法也适用于金属纤维层压板的剪切屈服强度。采用Iosipescu试验对其剪切屈服性能进行了测试。
In this article a brief overview of the static properties of Fibre Metal Laminates is given. Starting with the stress-strain relation, an effective calculation tool for uniaxial stress-strain curves is given. The method is valid for all Glare types. The Norris failure model is described in combination with a Metal Volume Fraction approach leading to a useful tool to predict allowable blunt notch strength. The Volume Fraction approach is also useful in the case of the shear yield strength of Fibre Metal Laminates. With the use of the Iosipescu test shear yield properties are measured.