Fabrication of solid-state fuel cell based on DNA film

Fabrication of solid-state fuel cell based on DNA film
复制标题

DOI:
10.1016/j.ssc.2004.09.055
复制
发表时间:
2005-01-01
影响因子:
2.1
通讯作者:
Ikehata, S
Ikehata, S
中科院分区:
物理与天体物理4区
文献类型:
--
作者:
Matsuo, Y;Kumasaka, G;Ikehata, S

文献摘要

被引文献

相似文献

我们制备了一种基于DNA膜的燃料电池(DNAFC),并在室温下研究了其在不同湿度条件下的性能。DNAFC的开路电压是通过向阳极供应H-2气体来产生的。开路电压在很大程度上取决于湿度条件。在DNA影片中。在相对湿度为55%的条件下达到开路电压达到高达0.55V的最佳条件。此外。DNAFC的电池电压随着电流密度的增加而降低。如在燃料电池如质子交换膜燃料电池、固体氧化物燃料电池中观察到的。还有其他几个这些结果表明,DNA膜可以在约55%的湿度条件下用作燃料电池电解质。(C)2004爱思唯尔有限公司保留所有权利。
We have fabricated a fuel cell based oil the DNA film (DNAFC) and examined its properties under various humidity conditions at room temperature. The open-circuit voltage of a DNAFC is generated by Supplying H-2 gas to the anode. The open-circuit voltage strongly depends oil the humidity conditions. and in a DNA film. the optimum condition in which the open-circuit voltage attains a value as high as 0.55 V is achieved under the relative humidity condition of 55%. Furthermore. the cell voltage of the DNAFC decreases with all increase in current density. as observed in fuel cells such as proton exchange membrane fuel cell, solid oxide fuel cell. and several others. These results indicate that DNA film can be used as the fuel cell electrolyte under approximately 55% humidity condition. (C) 2004 Elsevier Ltd. All rights reserved.