Design criteria for energy efficient belt conveyor drives
Design criteria for energy efficient belt conveyor drives
复制标题
节能带式输送机驱动装置的设计标准
DOI：
--
复制
发表时间：
2014
期刊：
影响因子：
--
通讯作者：
W. Hofmann
中科院分区：
文献类型：
--
作者：
J. Schutzhold;K. Benath;V. Muller;W. Hofmann
传统的带式输送机系统的设计主要集中在其机械参数上。在本文中，这种设计是重新考虑，旨在提高能源效率。为此，必须考虑整个机电系统-从皮带到电源。所有这些系统组件都被建模，以估计在不同工作点的损失-特别是在部分负载条件下。这些模型基于免费提供的数据表参数。因此，本文提出的设计标准可以直接应用在设计过程的早期阶段，以找到合适的驱动配置。最终的结果是一个选择图，它可以快速做出高效输送机驱动的概念决策。
The conventional design of belt conveyor systems usually focuses on their mechanical parameters. In this paper, this design is reconsidered aiming at an improved energy efficiency. To this end, it is essential to consider the entire electromechanical system - from the belt to the electrical power supply. All these system components are modeled in order to estimate the losses at various operating points - especially in partial load conditions. These models are based on freely available data-sheet parameters. Hence, the design criteria presented in this paper can be applied directly in an early stage of the design process in order to find suitable drive configurations. The final result is a Selection Diagram which enables fast concept decisions for efficient conveyor drives.