Influence of chemistry and hot rolling conditions on high permeability non-grain oriented silicon steel
Influence of chemistry and hot rolling conditions on high permeability non-grain oriented silicon steel
复制标题
DOI：
10.1016/j.jmmm.2006.02.213
复制
发表时间：
2006-09-01
影响因子：
2.7
通讯作者：
Magurova, A.
中科院分区：
文献类型：
--
作者：
Hunady, J.;Cernik, M.;Magurova, A.
本文讨论了化学成分对高磁导率材料最终电磁性能的影响。此外，还讨论了热轧实践和奥氏体相变温度范围结束对热带组织的影响。磁极J（5000）优于1.7 T，采用热轧条件下传递棒厚度40mm，精轧机入口温度1000℃，精轧机温度800-840℃，并经过脱碳热处理和晶粒生长处理，获得。(C) 2006 Elsevier B.V.版权所有
This paper discusses the influence of chemical composition on the final electromagnetic properties in higher permeability material. Furthermore, the effect of the hot rolling practice and the end of austenite transformation temperature range on the hot band microstructure is described. The magnetic polarization J(5000) better than 1.7 T, using hot rolling conditions 40mm transfer bar thickness,finish mill entry temperature 1000 degrees C, and finishing temperature 800-840 degrees C and after decarburization heat treatment and grain growth treatment, was obtained. (C) 2006 Elsevier B.V. All rights reserved.