Design and development of electronics for the EuXFEL clock and control system
Design and development of electronics for the EuXFEL clock and control system
复制标题
EuXFEL 时钟和控制系统电子器件的设计和开发
DOI：
--
复制
发表时间：
2012
期刊：
影响因子：
--
通讯作者：
M. Wing
中科院分区：
文献类型：
--
作者：
E. Motuk;M. Postranecky;M. Warren;M. Wing
介绍了用于 EuXFEL DAQ 系统的时钟和控制 (CC) 硬件和固件的开发。该系统利用了新的物理学电信架构标准提供的数据处理进步。 CC 负责将 DAQ 系统与整个系统时序同步。硬件由 DESY 设计的 MTCA.4 板和 UCL 设计的后部转换模块 (RTM) 组成。每个 RTM 为 1 兆像素 2D 探测器控制多达 16 个前端模块 (FEM)。 CC 系统旨在提供可扩展性和可扩展性，以支持未来对 DAQ 或更大探测器的升级。
The development of the Clock and Control (CC) hardware and firmware for the EuXFEL DAQ system is presented. The system exploits the data handling advances provided by the new telecommunication architecture standard for physics. The CC is responsible for synchronising the DAQ system to overall system timing. The hardware consists of a DESY designed MTCA.4 board and a UCL designed Rear Transition Module (RTM). Each RTM controls up to 16 Front End Modules (FEMs) for a 1 Megapixel 2D detector. The CC system is designed to provide extendibility and scalability to support future upgrades to the DAQ or larger detectors.
欧洲 XFEL 大像素探测器的数据采集卡
影响因子：
1.3
作者：
Coughlan J
通讯作者：
Coughlan J