Characteristics of a Heat Output of an Adsorption Heat Pump Aided with Pumping
Characteristics of a Heat Output of an Adsorption Heat Pump Aided with Pumping
复制标题
抽吸式吸附热泵的热输出特性
DOI：
10.1252/jcej.40.259
复制
发表时间：
2007
影响因子：
0.8
通讯作者：
Mitihito Kanamori
中科院分区：
文献类型：
--
作者：
Y. Hirota;Matsumoto Atsushi;M. Kubota;Fujio Watanabe;N. Kobayashi;M. Hasatani;Mitihito Kanamori
提出了一种吸附式热泵（AHP），以扩大可用热源，提高制冷功率。本研究的主要目的是利用机械增压泵（MBP）和填充床吸附器组成的硅胶-水AHP进行吸附平衡点操作范围的概念性研究和解吸和吸附过程的实验研究。这一效应在实验上得到了证实。在这些实验范围内，泵功率的大小对于增加冷却功率是有效的。因此，可以确认，能够用作热源的温度范围扩大，并且直接通过泵功率来增加冷却功率。
An adsorption heat pump (AHP) is proposed to expand the available heat sources and to increase cooling power. The main objective of this research is to carry out the conceptual study of operation range in points of adsorption equilibria and experimental study of desorption and adsorption processes by silica gel–water AHP which is composed of a mechanical booster pump (MBP) and an adsorber of packed bed. This effect is confirmed experimentally. In these experimental ranges, the amount of pump power is effective to increase cooling power. Therefore, it is confirmed that the range of temperature, which is able to use as a heat source, is expanded and cooling power is increased directly by pump power.
2(3)-NH2-BODIPY衍生物的光学性质检测及荧光探针的开发
DOI：
--
发表时间：
2011
期刊：
影响因子：
--
作者：
中島幸彦;他
通讯作者：
他