Analysis of Environmental and Economic Disassembly Parts Selection by Goal Programming
Analysis of Environmental and Economic Disassembly Parts Selection by Goal Programming
复制标题
目标规划环境经济拆解零件选择分析
DOI：
10.1016/j.procir.2016.01.092
复制
发表时间：
2016
期刊：
影响因子：
--
通讯作者：
Aya Ishigaki and Masato Inoue
中科院分区：
文献类型：
--
作者：
Yuki Kinoshita;Tetsuo Yamada;Surendra M. Gupta;Aya Ishigaki and Masato Inoue
由正向和反向流动组成的闭环供应链需要回收使用寿命结束的装配产品的拆卸系统。为了经济和环保地运营回收工厂，经常进行拆卸部件的选择。Igarashi等人（2014）提出了基于可回收性评价方法的环境经济拆卸件选择问题，Kinoshita等人（2015）采用了目标规划方法解决这一双目标问题。本研究将Kinoshita等人（2015）提出的环境经济拆卸件选择问题应用于手机，并通过产品实例分析验证了设计方法。首先，阐述了产品间的设计过程。其次，将该方法应用于手机，分析其共性和差异性。最后，将结果与Igarashi等人（2014）和Kinoshita等人（2015）进行比较。
The closed-loop supply chains that consist of forward and reverse flows require disassembly systems that recycle the end of life assembly products. To operate recycling factories economically and environmentally, a disassembly parts selection is often carried out. Igarashi et al. (2014) proposed the environmental and economic disassembly parts selection using Recyclability Evaluation Method by Integer Programming with the ɛ constraint method, and Kinoshita et al. (2015) adopted Goal Programming to this bi-objective problem.This study adopts the environmental and economic disassembly parts selection using Goal Programming proposed by Kinoshita et al. (2015) to cell phone, and validates the design method by analyzing the product example. First, the design procedure among products is explained. Second, the method is applied to cell phone in order to analyze the common and different characteristics. Finally, the results are compared to Igarashi et al. (2014) and Kinoshita et al. (2015).
DOI：
10.1201/b13184
发表时间：
2016
期刊：
--
影响因子：
--
作者：
A. Ravindran;Donald P. Warsing
通讯作者：
Donald P. Warsing
逆向供应链：问题与分析
DOI：
10.1201/b13749
发表时间：
2013
期刊：
The Cleft Palate-Craniofacial Journal
影响因子：
--
作者：
S. Gupta
通讯作者：
S. Gupta
影响因子：
0.7
作者：
Kento Igarashi;Tetsuo Yamada;M. Inoue
通讯作者：
Kento Igarashi;Tetsuo Yamada;M. Inoue