Effects of superimposed hydrostatic pressure on flow and fracture of a Zr-Ti-Ni-Cu-Be bulk amorphous alloy
Effects of superimposed hydrostatic pressure on flow and fracture of a Zr-Ti-Ni-Cu-Be bulk amorphous alloy
复制标题
DOI：
10.1016/s1359-6462(99)00128-1
复制
发表时间：
1999-06-04
影响因子：
6
通讯作者：
Lewandowski, JJ
中科院分区：
文献类型：
--
作者：
Lowhaphandu, P;Montgomery, SL;Lewandowski, JJ
结果所有试件均表现出载荷与位移的线性关系。在1atm（即0.1 MPa）下测试的拉伸试样显示出名义上垂直于拉伸轴的断口，如图1a所示。这些测试显示了多个碎片，所有表面（名义上）宏观上垂直于拉伸轴，并从标本肩部移除。所有其它试样（即压缩、拉伸试样）与讨论
ResultsAll specimens tested exhibited load vs. displacement traces which were linear to failure. The tension specimens tested at 1 atm (ie, 0.1 MPa) exhibited fracture surfaces which were oriented nominally perpendicular to the tensile axis, as shown in Figure 1a. Multiple fragments were exhibited by such tests and all surfaces were (nominally) macroscopically perpendicular to the tensile axis and well removed from the specimen shoulders. All other specimens (ie, compression, tension withDiscussion