Feasibility Study on Fiber-Optic Goniometer for Measuring Knee Joint Angle
Feasibility Study on Fiber-Optic Goniometer for Measuring Knee Joint Angle
复制标题
DOI：
10.1007/s10043-014-0112-z
复制
发表时间：
2014-09-01
期刊：
影响因子：
1.2
通讯作者：
Lee, Bongsoo
中科院分区：
文献类型：
--
作者：
Kim, Seon Geun;Jang, Kyoung Won;Lee, Bongsoo
在这项研究中，我们使用塑料光纤、发光二极管和光电二极管制作了一个光纤测角仪。有规律地每隔0.5 - 3毫米去除塑料光纤的包层，以增加塑料光纤的弯曲损耗。此外，测量了基于使用光纤测角仪所测光强的光电二极管的输出电压，以评估光纤测角仪的线性度。最后，我们使用数据采集板和LabVIEW程序，测量了光纤测角仪在3、5和10千米/小时的步态速度下的响应。（C）2014日本应用物理学会
In this study, we fabricated a fiber-optic goniometer using a plastic optical fiber, a light-emitting diode, and a photodiode. The cladding of the plastic optical fiber was removed at 0.5-3mm intervals regularly to increase the bending loss of the plastic optical fiber. Also, the output voltages of the photodiode based on light intensity that measured using the fiber-optic goniometer were measured light intensities using the fiber-optic goniometer were measured to evaluate the linearity of the fiber-optic goniometer. Finally, we measured the responses of the fiber-optic goniometer for gait speeds of 3, 5, and 10 km/h using a data acquisition board and a LabVIEW program. (C) 2014 The Japan Society of Applied Physics