Data Report on Post-Irradiation Dimensional Change of AGC-1 Samples
Data Report on Post-Irradiation Dimensional Change of AGC-1 Samples
复制标题
AGC-1 样品辐照后尺寸变化的数据报告
DOI：
--
复制
发表时间：
2012
期刊：
影响因子：
--
通讯作者：
W. Windes
中科院分区：
文献类型：
--
作者：
W. Windes
本报告总结了加载和卸载AGC-1样品的初始尺寸变化。所有样品的尺寸变化都表现为剂量的函数。数据进一步按石墨类型和施加的载荷水平呈现，以说明石墨成形过程和石墨组件内应力水平之间的差异。虽然对样品施加的三种不同载荷已经得到验证[参考：拉里·赫尔的报告]，但AGC-1样品的温度和剂量水平的验证预计将在2012年夏天进行。本报告仅提供样品的估计剂量和温度值，以便对结果进行部分分析。
This report summarizes the initial dimensional changes for loaded and unloaded AGC-1 samples. The dimensional change for all samples is presented as a function of dose. The data is further presented by graphite type and applied load levels to illustrate the differences between graphite forming processes and stress levels within the graphite components. While the three different loads placed on the samples have been verified [ ref: Larry Hull’s report] verification of the AGC-1 sample temperatures and dose levels are expected in the summer of 2012. Only estimated dose and temperature values for the samples are presented in this report to allow a partial analysis of the results.