Control of deformable mirrors including a nonlinear modal model for air gap damping

Control of deformable mirrors including a nonlinear modal model for air gap damping
复制标题

可变形镜的控制,包括气隙阻尼的非线性模态模型

DOI:
10.1117/12.2237839
复制
发表时间:
2016
期刊:
影响因子:
--
通讯作者:
O. Sawodny
O. Sawodny
中科院分区:
--
文献类型:
--
作者:
M. Böhm;O. Sawodny

文献摘要

参考文献

被引文献

相似文献

在本文中,我们提出了非线性压力动力学的线性分布参数模型的变形镜的扩展。原始的,无阻尼模型被召回和测量结果显示支持需要一个阻尼模型,其中包括后面的镜膜的气隙的压力动态。我们将推导出阻尼系数以匹配我们的测量结果。基于此模型,我们将推导出一个模态前馈和反馈控制律的88执行器基于只有3个位置传感器,并显示仿真结果,以支持该算法的有效性。
In this paper, we present nonlinear pressure dynamics as an extension to a linear distributed parameters model of a deformable mirror. The original, undamped model is recalled and measurement results are shown supporting the need for a damping model which includes the pressure dynamics of the air gap behind the mirror membrane. We will derive the damping coefficients to match our measurement results. Based on the mew model, we will derive a modal feedforward and feedback control law for 88 actuators based on only 3 position sensors and show simulation results to support the algorithm's effectiveness.
用于近乎恒定梁模态阻尼的“几何”粘性阻尼模型
DOI: --
发表时间: 2013
期刊:
影响因子: --
作者:
G. Lesieutre;Jeffrey L. Kauffman
通讯作者: Jeffrey L. Kauffman
通过粘性“几何”阻尼模型实现弯曲结构的频率无关模态阻尼
DOI: --
发表时间: 2010
期刊:
影响因子: --
作者:
G. Lesieutre
通讯作者: G. Lesieutre
飞行模拟器中使用的气动执行器的阀门流量识别和稳健的力控制
DOI: --
发表时间: 2012
期刊: American Control Conference
影响因子: --
作者:
P. Rapp;Martin Weickgenannt;C. Tarín;O. Sawodny
通讯作者: O. Sawodny
DOI: 10.3166/ejc.17.261-272
发表时间: 2011
期刊: Eur. J. Control
影响因子: --
作者:
T. Ruppel;W. Osten;O. Sawodny
通讯作者: T. Ruppel;W. Osten;O. Sawodny
基于模态估计可变形镜形状的最佳传感器放置
DOI: 10.1109/cca.2015.7320665
发表时间: 2015
期刊: 2015 IEEE Conference on Control Applications (CCA)
影响因子: --
作者:
M. Böhm;O. Sawodny
通讯作者: O. Sawodny