Microstructure and tribological behaviors of Ti6Al4V alloy treated by plasma Ni alloying

Microstructure and tribological behaviors of Ti6Al4V alloy treated by plasma Ni alloying
复制标题

等离子Ni合金化处理Ti6Al4V合金的显微组织和摩擦学行为

DOI:
10.1016/j.apsusc.2011.07.040
复制
发表时间:
2011-09
影响因子:
6.7
通讯作者:
Tang, Bin
Tang, Bin
中科院分区:
材料科学1区
文献类型:
--
作者:
Wang, Zhenxia;He, Zhiyong;Wang, Yingqin;Liu, Xiaoping;Tang, Bin

文献摘要

参考文献

被引文献

相似文献

Ni modified layer was prepared on surface of the Ti6Al4V substrate by plasma surface alloying technique. Surface morphology, micro-structure, composition distribution, phase structure, and microhardness of the Ni modified layer were analyzed. Tribological performance of the Ni modified layer and Ti6Al4V substrate was investigated by using pin-on-disc tribometer. The results indicate that roughness of the Ni modified layer was increased due to formation of the micro-convex on the modified surface. The concentration of Ni gradually decreased from the surface to interior. The maximum content of Ni atoms was nearly 90%. The modified layer was composed of TiNi, Ti2Ni and Ti phases. The maximum microhardness of the Ni modified layer was about 677HV0.025which was increased about two-fold of microhardness of the control Ti6Al4V substrate. Wear resistance of the Ni modified layer was improved obviously, and showed micro-abrasion wearing. The strengthened mechanism of the as-treated Ti6Al4V alloy is discussed.
DOI: 10.1016/j.wear.2008.07.005
发表时间: 2009-01
期刊: Wear
影响因子: 5
作者:
C. Monticelli;F. Zucchi;A. Tampieri
通讯作者: C. Monticelli;F. Zucchi;A. Tampieri
DOI: 10.1016/j.surfcoat.2006.07.061
发表时间: 2007-02
影响因子: 5.4
作者:
Zhi-yong He;Zhenxia Wang;Wenbo Wang;Ailan Fan;Zhong Xu
通讯作者: Zhi-yong He;Zhenxia Wang;Wenbo Wang;Ailan Fan;Zhong Xu
DOI: 10.1016/s0043-1648(98)00269-5
发表时间: 1998-10-01
期刊: WEAR
影响因子: 5
作者:
Li, DY
通讯作者: Li, DY
DOI: 10.1016/j.intermet.2007.09.008
发表时间: 2008-02-01
期刊: INTERMETALLICS
影响因子: 4.4
作者:
Gao, F.;Wang, H. M.
通讯作者: Wang, H. M.
DOI: 10.1016/s0924-4247(99)00003-5
发表时间: 1999-05
影响因子: 4.6
作者:
E. Makino;Kazuhiro Kato;T. Shibata
通讯作者: E. Makino;Kazuhiro Kato;T. Shibata