INFLUENCE OF FABRICATION TECHNIQUE ON WROUGHT WIRE CLASP FLEXIBILITY
INFLUENCE OF FABRICATION TECHNIQUE ON WROUGHT WIRE CLASP FLEXIBILITY
复制标题
DOI：
10.1016/0022-3913(85)90430-5
复制
发表时间：
1985-01-01
影响因子：
4.6
通讯作者：
PESAVENTO, JR
中科院分区：
文献类型：
--
作者：
STADE, EH;STEWART, GP;PESAVENTO, JR
方法在本研究中测试的两种导丝是1号PGP（JM Ney Co.，康涅狄格州布卢姆菲尔德），贵重金属线和18号Ticonium（TiconiumCo.，奥尔巴尼，纽约），贱金属线。它们的组成在表I中给出。准备25 mm长的金属丝，随机分为6组，每组8根，每组进行Morris等人1所述的应力松弛试验。6使用黄铜滑环将电线牢固地固定在分开的黄铜保持器中。在距离黄铜保持器10 mm处垂直于导丝长轴施加载荷。这个悬臂梁结构-
METHODSThe two wires tested in this study were l&gauge PGP (JM Ney Co., Bloomfield, Conn.), a noble content wire, and 18-gauge Ticonium (Ticonium Co., Albany, NY), a base metal wire. Their compositions are given in Table I. The wires were prepared in 25 mm lengths and randomly divided into six groups of eight wires of each type.Each group was subjected to stress-relaxation testing as described by Morris et a1. 6 The wires were held firmly in a split brass holder using a brass slip ring. The load was applied perpendicular to the long axis of the wire 10 mm from the brass holder. This cantilever beam config-