SSR1 CRYOMODULE DESIGN FOR PXIE

SSR1 CRYOMODULE DESIGN FOR PXIE
复制标题

适用于 PXIE 的 SSR1 低温模块设计

DOI:
10.2172/1250873
复制
发表时间:
2012
期刊:
--
影响因子:
--
通讯作者:
T. Nicol
T. Nicol
中科院分区:
--
文献类型:
--
作者:
T. Nicol

文献摘要

被引文献

相似文献

费米实验室正在设计Project X注入器实验(PXIE),即CW直线加速器,以验证Project X概念,降低技术风险,并获得超导质子直线加速器的设计和操作经验。整个设施将包括一个离子源、低能和中能束传输部分、一个射频四极杆和两个超导腔低温模块。其中一个将包含八个工作频率为 162.5 MHz 的半波谐振器和八个超导螺线管。第二个将包含八个工作频率为 325 MHz 的单辐谐振器 (SSR1) 和四个超导螺线管。这里描述了正在开发的用于容纳 325 MHz 单辐谐振器以及所有相关系统和服务的低温模块的设计......
Fermilab is in the process of designing a Project X Injector Experiment (PXIE), a CW linac, to validate the Project X concept, reduce technical risks, and obtain experience in the design and operation of a superconducting proton linac. The over-all facility will include an ion source, low and medium-energy beam transport sec-tions, an RF quadrupole, and two superconducting cavity cryomodules. One will contain eight half-wave resonators operating at 162.5 MHz and eight superconduct-ing solenoids. The second will contain eight single spoke resonators (SSR1) oper-ating at 325 MHz and four superconducting solenoids. The design of the cryomod-ule being developed to house the 325 MHz single spoke resonators and all related systems and services is described here....