Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting-Selection Guidelines.
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting-Selection Guidelines.
复制标题
DOI：
10.3390/ma10060672
复制
发表时间：
2017-06-19
期刊：
影响因子：
--
通讯作者：
Eckert J
中科院分区：
文献类型：
--
作者：
Gokuldoss PK;Kolla S;Eckert J
增材制造（AM），也称为3D打印或快速原型，由于其能够生产具有附加功能和几何设计复杂性的零件，以及理论上可以无限制地生产任何形状的事实，因此越来越受到关注。然而，大多数关于增材制造技术的研究都集中在材料/工艺参数/产品设计的开发上，这些材料/工艺参数/产品设计采用不同的增材制造工艺，例如选择性激光熔化、电子束熔化或粘合剂喷射。但是，我们没有任何指导方针来讨论如何选择最合适的增材制造工艺，这取决于要加工的材料，要生产的零件的复杂性或设计考虑因素。考虑到没有报道涉及这种工艺选择的事实，本手稿旨在讨论要考虑的不同选择标准，以选择最佳AM工艺（粘合剂喷射/选择性激光熔化/电子束熔化）来制造具有一组定义的材料特性的特定组件。
Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, on top of the fact that it is theoretically possible to produce any shape without limitations. However, most of the research on additive manufacturing techniques are focused on the development of materials/process parameters/products design with different additive manufacturing processes such as selective laser melting, electron beam melting, or binder jetting. However, we do not have any guidelines that discuss the selection of the most suitable additive manufacturing process, depending on the material to be processed, the complexity of the parts to be produced, or the design considerations. Considering the very fact that no reports deal with this process selection, the present manuscript aims to discuss the different selection criteria that are to be considered, in order to select the best AM process (binder jetting/selective laser melting/electron beam melting) for fabricating a specific component with a defined set of material properties.
登录
查看更多内容
影响因子：
10.9
作者：
Attar, Hooyar;Prashanth, Konda G.;Eckert, Juergen
通讯作者：
Eckert, Juergen
影响因子：
8.4
作者：
Liverani, E.;Fortunato, A.;Ascari, A.
通讯作者：
Ascari, A.
DOI：
10.1016/j.jmbbm.2015.10.019
发表时间：
2016-03-01
影响因子：
3.9
作者：
Lu, Yanjin;Wu, Songquan;Lin, Jinxin
通讯作者：
Lin, Jinxin
影响因子：
9.4
作者：
Attar, Hooyar;Boenisch, Matthias;Eckert, Juergen
通讯作者：
Eckert, Juergen
影响因子：
6
作者：
Hrabe, Nikolas;Gnaupel-Herold, Thomas;Quinn, Timothy
通讯作者：
Quinn, Timothy