30 m YBCO cable for the Albany HTS cable project
30 m YBCO cable for the Albany HTS cable project
复制标题
用于奥尔巴尼 HTS 电缆项目的 30 m YBCO 电缆
DOI：
10.1088/1742-6596/97/1/012076
复制
发表时间：
2008
期刊：
影响因子：
--
通讯作者：
K. Satô
中科院分区：
文献类型：
--
作者：
H. Yumura;M. Watanabe;M. Ohya;Y. Ashibe;H. Ito;T. Masuda;K. Satô
奥尔巴尼高温超导电缆项目的目的是确定在国家电网电力公司的两个变电站之间运营350米长的高温超导电缆系统的可行性，连接他们真正的商业电网的部分。该部分电网在34.5千伏时的容量为800A，BSCCO高温超导电缆于2006年7月20日开始正常运行。自那时以来，长期无故障和无人值守的并网运行一直在继续，2007年5月初仅中断一次，以便将30米长的BSCCO电缆段更换为新的YBCO电缆。这种新型高温超导电缆的YBCO涂层导体是由SuperPower公司制备的，同时制作了测试芯进行测试，以确认其电气和机械性能的充分性。该工艺生产的电缆具有设计的临界导体电流和屏蔽，故障电流测试结果与BSCCO的测试结果基本相同，没有集成电路退化。试验结果证实了该YBCO堆芯设计的适用性。一根30米长的YBCO电缆已于2007年5月如期制造并运往奥尔巴尼。本文介绍了BSCCO电缆和YBCO样品芯的试验结果，以及30m YBCO电缆的制作。
The purpose of the Albany HTS Cable Project is to establish the feasibility of operating a 350 meter long HTS cable system between two substations of the National Grid Power Company, connecting parts of their real commercial grid. This part of the grid has a capacity of 800 A at 34.5 kV, and BSCCO HTS cable began operation on July 20, 2006 in good order. Long-term trouble-free and unattended in-grid operation has continued since then, interrupted just once in early May, 2007 to allow the replacement of the 30 m section of BSCCO cable with new YBCO cable. The YBCO coated conductor for this new HTS cable was prepared by Superpower while a test core was fabricated for testing to confirm the adequacy of its electrical and mechanical properties. This process produced cable with as-designed critical conductor current and shielding, and the results of the fault current test were almost identical to those of BSCCO, with no Ic degradation. Test results thus confirmed the applicability of this YBCO core design. A 30 m YBCO cable was manufactured and shipped to Albany on May, 2007, on schedule. This paper describes the test results for the BSCCO cable and a YBCO sample core, and the manufacture of the 30 m YBCO cable.