Transparent conductive films based on the laser sintering of metal and metal oxide nanoparticles
Transparent conductive films based on the laser sintering of metal and metal oxide nanoparticles
复制标题
基于金属和金属氧化物纳米粒子激光烧结的透明导电薄膜
DOI：
10.1117/12.2037545
复制
发表时间：
2014
期刊：
影响因子：
--
通讯作者：
A. Watanabe,
中科院分区：
文献类型：
--
作者：
倉本繁;堀渕嘉代;青井一郎;Gang Qin;Akira Watanabe;Gang Qin;A. Watanabe,
采用CW DPSS激光器的激光烧结被应用于使用银和氧化铟锡（ITO）纳米颗粒油墨的透明导电膜的制造。银纳米颗粒薄膜的激光烧结得到厚度约为100nm的透明导电膜。10 nm，而这样的薄膜通过常规的热处理，使用电子炉是绝缘体，因为孤立的银颗粒的形成过程中缓慢的加热过程中的激光烧结条件，如激光扫描速度对导电性和透明度的影响进行了研究。使用ITO纳米粒子油墨的激光烧结通过激光束在空气中的一步扫描得到高透明导电膜。
The laser sintering employing a CW DPSS laser was applied to the fabrication of transparent conductive films using silver and indium tin oxide (ITO) nanoparticle inks. The laser sintering of an Ag nanoparticle thin film gave a transparent conductive film with a thickness of ca. 10 nm, whereas such a thin film fabricated by conventional heat treatment using an electronic furnace was insulator because of the formation of isolated silver grains during the slow heating process The influences of the laser sintering conditions such as laser scan speed on the conductivity and the transparency were studied. The laser sintering using ITO nanoparticle ink gave a high transparent conductive film by one step scanning of laser beam in air.