Microstructure and mechanical properties of the Si3N4/42CrMo steel joints brazed with Ag-Cu-Ti plus Mo composite filler
Microstructure and mechanical properties of the Si3N4/42CrMo steel joints brazed with Ag-Cu-Ti plus Mo composite filler
复制标题
Ag-Cu-Ti+Mo复合钎料钎焊Si3N4/42CrMo钢接头的显微组织与力学性能
DOI：
10.1016/j.jeurceramsoc.2010.07.005
复制
发表时间：
2010-11-01
影响因子：
5.7
通讯作者：
Liu, C. F.
中科院分区：
文献类型：
--
作者：
He, Y. M.;Zhang, J.;Liu, C. F.
The Si3N4 ceramic was joined to 42CrMo steel using Ag-Cu-Ti + Mo composite filler. Effect of Mo particles content on the microstructure and mechanical properties of the joints were investigated. Defect-free joints were received when the Si3N4/42CrMo steel joints were brazed with Ag-Cu-Ti + Mo composite filler. The results show that a continuous reaction layer which is composed of TiN and Ti5Si3 was formed near the Si3N4 ceramic. A double reaction layer which consists of Fe2Ti and FeTi was also formed adjacent to 42CrMo steel, with Fe2Ti being located near the steel. The central part of the joint is composed of Ag based solid solution, Cu based solid solution, Mo particles and some Cu-Ti intermetallic compounds. The maximal bending strength reached 587.3 MPa with 10 vol.% Mo particles in the joint, at which the joint strength was 414.3% higher than the average strength for the case without Mo particles addition. (C) 2010 Elsevier Ltd. All rights reserved.
