5G mm-Wave MIMO Antenna with Beam Switching Capabilities Fabricated Using 3D Printing

5G mm-Wave MIMO Antenna with Beam Switching Capabilities Fabricated Using 3D Printing
复制标题

DOI：
10.1109/ieeeconf35879.2020.9329899
复制
发表时间：
2020-07
期刊：
2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting
影响因子：
--
通讯作者：
Shaker Alkaraki;J. Kelly;Yue Gao;S. Stremsdoerfer;E. Gayets
Shaker Alkaraki;J. Kelly;Yue Gao;S. Stremsdoerfer;E. Gayets
中科院分区：
其他
文献类型：
--
作者：
Shaker Alkaraki;J. Kelly;Yue Gao;S. Stremsdoerfer;E. Gayets

文献摘要

被引文献

相似文献

本文提出了一种用于5G毫米波应用的MIMO天线。所提出的MIMO能够在不使用移相器的情况下在高达± 30°的仰角中提供连续的波束覆盖。所提出的MIMO是使用3D打印制造的，并且在宽带上具有良好的测量性能。拟议的MIMO工作在28 GHz 5G频段，测量带宽超过4 GHz，测量峰值增益高于10 dBi。
This paper presents a MIMO antenna for 5G mm-wave applications. The proposed MIMO is capable of providing continues beam cover in the elevation for up to ± 30° without using phase shifters. The proposed MIMO is fabricated using 3D printing and it has good measured performance over wide band. The proposed MIMO operates at 28 GHz 5G band with a measured bandwidth of more than 4 GHz and a measured peak gain of higher than 10 dBi.