Reliable material damping ratio determination in machine tool structures
Reliable material damping ratio determination in machine tool structures
复制标题
可靠确定机床结构中的材料阻尼比
DOI：
10.1007/s11740-012-0393-7
复制
发表时间：
2012
期刊：
影响因子：
--
通讯作者：
Schwarz
中科院分区：
文献类型：
--
作者：
Niehues;Schwarz
The determination of material damping ratios in machine tools is afflicted with considerable uncertainties. For the estimation of damping ratios different methods are available, each with specific model assumptions and parameters. Depending on the experience already gained with one method, the quality of the resulting values therefore can vary considerably. This paper proposes the simultaneous application of two different calculation methods, namely the logarithmic decrement and the bandwidth method, to the same measured signal. Assuming a decaying, time-limited and very lightly damped response signal, both methods cannot be applied in their original form. Therefore a filter-based logarithmic decrement and a frequency resolution enhanced bandwidth method are used. To demonstrate the capability of the approach, both methods are applied to an analytical three-degree-of-freedom system derived from a measured structure. The damping ratios yielded by both methods deviate less than 1 % from the analytical value. Furthermore, in a real measurement with uncertain system properties and parameter choice, the combined use of both methods can be used to assess the uncertainty of the obtained values. The capability of the proposed method is demonstrated on the basis of the measurement of a small machine tool component.
登录
查看更多内容
提高确定非轻阻尼系统阻尼的 n-dB 方法的精度
DOI：
--
发表时间：
2010
期刊：
影响因子：
--
作者：
D. K. Anthony;F. Simón
通讯作者：
F. Simón
使用非参数指数窗技术改进低阻尼系统的模态参数估计
DOI：
--
发表时间：
2005
期刊：
影响因子：
--
作者：
P. Verboven;E. Parloo;B. Cauberghe;P. Guillaume
通讯作者：
P. Guillaume
影响因子：
20.6
作者：
R. Lake
通讯作者：
R. Lake
抑制噪声和指数窗造成的不确定性
DOI：
--
发表时间：
2011
期刊：
影响因子：
--
作者：
H. Koruk;K. Sanliturk
通讯作者：
K. Sanliturk
DOI：
--
发表时间：
1981
期刊：
影响因子：
--
作者：
A. Seybert
通讯作者：
A. Seybert