Increasing Arc Column Resistance During DC Arc‐Quenching Through Arrangement of Polymer Cylinder in Silica Sand
Increasing Arc Column Resistance During DC Arc‐Quenching Through Arrangement of Polymer Cylinder in Silica Sand
复制标题
通过在硅砂中布置聚合物柱体来提高直流灭弧过程中的弧柱电阻
DOI：
10.1002/tee.23368
复制
发表时间：
2021
影响因子：
1
通讯作者：
Y. Kondo
中科院分区：
文献类型：
--
作者：
Koya Nakamura;N. Kodama;Y. Yokomizu;Asato Takahashi;Y. Kondo
在本研究中，有关直流中断的实验在充满硅砂的灭弧室中进行。首先，在直流灭弧过程中测量电弧柱电阻，以展示硅砂填充空间中电弧的基本方面。随后，在填充硅砂的空间中，提出了一种由聚合物圆柱体组成的电极之间的布置，以增加直流灭弧时弧柱的电阻。实验采用聚甲基丙烯酸甲酯（PMMA）圆柱体。测量结果表明，与无PMMA圆柱布置相比，PMMA圆柱布置使弧柱阻力增加了约两倍。最后，从PMMA和二氧化硅蒸气的角度讨论了提高电弧柱电阻的效果。©2021日本电气工程师学会。Wiley期刊有限责任公司出版。
In this study, experiments pertaining to direct current (DC) interruptions are performed in an arc‐quenching chamber filled with silica sand. First, the arc column resistance is measured during DC arc‐quenching to demonstrate the elementary aspects of the arc in the silica‐sand‐filled space. Subsequently, an arrangement comprising a polymer cylinder between electrodes in the silica‐sand‐filled space is proposed to increase the arc column resistance during DC arc‐quenching. A polymethyl methacrylate (PMMA) cylinder is used in the experiments. Measurement results indicate that the arrangement of the PMMA cylinder causes the arc column resistance to increase approximately twofold in comparison with the no‐PMMA cylinder arrangement. Finally, the effect of increasing the arc column resistance is discussed in terms of PMMA and silica vapor. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC.