Comparison of a full factorial experiment to fractional and Taguchi designs in a lathe dry turning operation
Comparison of a full factorial experiment to fractional and Taguchi designs in a lathe dry turning operation
复制标题
DOI：
10.1016/0360-8352(94)90237-2
复制
发表时间：
1994-09
期刊：
影响因子：
3.9
通讯作者：
Youssef A. Youssef-Youssef-A.-Youssef-1661014244;Y. Beauchamp;M. Thomas
中科院分区：
文献类型：
--
作者：
Youssef A. Youssef-Youssef-A.-Youssef-1661014244;Y. Beauchamp;M. Thomas
本文对三种不同的试验设计进行了比较，旨在研究切削参数变化对表面光洁度的影响。结果表明，分数设计和田口设计(各16次试验)所获得的效应与完全析因设计(288次试验)所获得的主效应和两水平交互作用相当。因此，我们得出结论，筛选设计似乎是可靠和更经济的，因为它们允许将进行实验设计所需的时间和工作量减少18倍，而不会丢失有价值的信息。
This paper presents a comparison of three different experimental designs aimed at studying the effects of cutting parameters variations on surface finish. The results revealed that the effects obtained by analyzing both fractional and Taguchi designs (16 trials each) were comparable to the main effects and tow-level interactions obtained by the full factorial design (288 trials). Thus, we conclude that screening designs appear to be reliable and more economical since they permit to reduce by a factor 18 the amount of time and effort required to conduct the experimental design without losing valuable information.