Influence of different preparation and dyeing processes on the physical strength of the Ingeo fibre component in an Ingeo fibre/ cotton blend. Part 2: Bleaching followed by dyeing with disperse and reactive dyes
Influence of different preparation and dyeing processes on the physical strength of the Ingeo fibre component in an Ingeo fibre/ cotton blend. Part 2: Bleaching followed by dyeing with disperse and reactive dyes
复制标题
DOI：
10.1111/j.1478-4408.2004.tb00205.x
复制
发表时间：
2004
影响因子：
1.8
通讯作者：
D. Phillips;J. Suesat;M. Wilding;D. Farrington;Sophocles Sandukas;Dan Sawyer;J. Bone;Steve Dervan
中科院分区：
文献类型：
--
作者：
D. Phillips;J. Suesat;M. Wilding;D. Farrington;Sophocles Sandukas;Dan Sawyer;J. Bone;Steve Dervan
研究了不同的准备和染色工艺对Ingeo纤维/棉混纺织物中Ingeo纤维成分物理强度的影响。碱性精练工艺(用于棉)，然后是两浴两步染色工艺，其中Ingeo纤维用分散染料进行模拟染色，然后用活性染料对棉进行染色，对Ingeo纤维的强力影响最小。然而，如果Ingeo纤维的染色时间延长，特别是在中性或碱性的pH下，例如如果需要进行过多的色光添加，则可能会出现问题。
A study has been conducted to examine the effect of different preparation and dyeing processes on the physical strength of the Ingeo fibre component of an Ingeo fibre/cotton blend. An alkaline scouring process (for the cotton), followed by a two-bath, two-stage dyeing process in which the Ingeo fibre underwent a simulated dyeing with disperse dyes, followed by the cotton being dyed with reactive dyes, caused minimal deterioration to the strength of the Ingeo fibre. However, it is considered that problems might arise if the Ingeo fibre was subjected to prolonged dyeing times, particularly at neutral or alkaline pH, e.g. if an excessive number of shading additions needed to be carried out.