Effect of pseudo cross-rolling on the recrystallization texture of a continuous cast Al-Mg alloy
Effect of pseudo cross-rolling on the recrystallization texture of a continuous cast Al-Mg alloy
复制标题
拟斜纹轧制对连铸铝镁合金再结晶织构的影响
DOI：
10.1016/j.scriptamat.2009.01.015
复制
发表时间：
2009-05-01
影响因子：
6
通讯作者：
Meng, Xiangcai
中科院分区：
文献类型：
--
作者：
Liu, Wenchang;Li, Xingyi;Meng, Xiangcai
将连铸Al-Mg合金热轧带沿原轧制方向和原横向沿着冷轧至不同的压下量，然后在399 ℃下退火3 h。用X射线衍射法研究了斜轧对再结晶织构的影响。当斜轧压下量从0%增加到91%时，斜轧板呈现出从立方织构到{407}织构再到R织构的连续再结晶织构转变< 734 >。(c)2009 Acta Materialia Inc.由爱思唯尔有限公司出版。保留所有权利。
The hot band of a continuous cast Al-Mg alloy was cold-rolled to different reductions along the original rolling direction and the original transverse direction, and then annealed at 399 degrees C for 3 h. The effect of the cross-rolling on recrystallization texture was investigated by X-ray diffraction. The cross-rolled sheet appears to be a continuous recrystallization texture transition from the cube component through the {407}< 734 > component to the R component when the cross-rolling reduction increases from 0%, to 91%. (c) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.