The effect of the thickness of the adhesive layer on the ballistic limit of ceramic/metal armours. An experimental and numerical study
The effect of the thickness of the adhesive layer on the ballistic limit of ceramic/metal armours. An experimental and numerical study
复制标题
DOI：
10.1016/j.ijimpeng.2005.07.014
复制
发表时间：
2005-12
影响因子：
5.1
通讯作者：
J. López-Puente;A. Arias;R. Zaera;Carlos Navarro
中科院分区：
文献类型：
--
作者：
J. López-Puente;A. Arias;R. Zaera;Carlos Navarro
在这项工作中，研究了粘合剂层厚度对氧化铝/铝铠装效率的影响。进行了全面测试，向厚度足以阻止射弹且接近弹道极限的面板射击穿甲弹。不同厚度的粘合层为增韧环氧树脂。防火测试揭示了厚度对轻质保护响应的影响。进行数值模拟来分析实验结果。分析显示了最佳的粘合层厚度，以实现所考虑的轻质保护的最佳性能。
In this work, a study has been made of the effect of the adhesive layer thickness on the efficiency of alumina/aluminium armours. Full-scale tests were made shooting armour piercing projectile against panels thick enough to arrest the projectile and also close to the ballistic limit. The adhesive layer, of different thickness, was of the toughened epoxy resin. The fire tests revealed the influence of thickness on the response of the lightweight protection. Numerical simulations were performed to analyse the experimental results. The anaysis showed an optimum adhesive layer thickness for the best performance of the lightweight protection considered.