LamiFold: Fabricating Objects with Integrated Mechanisms Using a Laser cutter Lamination Workflow
LamiFold: Fabricating Objects with Integrated Mechanisms Using a Laser cutter Lamination Workflow
复制标题
LamiFold：使用激光切割机层压工作流程通过集成机制制造物体
DOI：
--
复制
发表时间：
2020
期刊：
影响因子：
--
通讯作者：
Raf Ramakers
中科院分区：
文献类型：
--
作者：
D. Leen;Nadya Peek;Raf Ramakers
我们提出了LamiFold，一种新颖的设计和制造工作流程，用于使用激光切割机制造功能性机械对象。用LamiFold制造的物体嵌入了先进的旋转、线性和链式机制，包括支持微调和锁定位置的连杆。激光切割这种没有LamiFold的机构需要设计和嵌入现成的零件，如弹簧，螺栓和齿轮轴。激光切割我们的功能机制的关键是选择性地切割和粘合堆叠的板材。为这个工作流程设计机制是不平凡的，因此，我们贡献了一组机械基元，与我们的层压工作流程兼容，可以结合起来，实现先进的机械系统。我们的软件设计环境促进了插入和组成我们的机械基元和实现功能性激光切割对象的过程。
We present LamiFold, a novel design and fabrication workflow for making functional mechanical objects using a laser cutter. Objects fabricated with LamiFold embed advanced rotary, linear, and chained mechanisms, including linkages that support fine-tuning and locking position. Laser cutting such mechanisms without LamiFold requires designing for and embedding off-the-shelf parts such as springs, bolts, and axles for gears. The key to laser cutting our functional mechanisms is the selective cutting and gluing of stacks of sheet material. Designing mechanisms for this workflow is non-trivial, therefore we contribute a set of mechanical primitives that are compatible with our lamination workflow and can be combined to realize advanced mechanical systems. Our software design environment facilitates the process of inserting and composing our mechanical primitives and realizing functional laser-cut objects.
大于各部分之和：在 3D 模型中表达和重用设计意图
DOI：
10.1145/3173574.3173875
发表时间：
2018
期刊：
Proceedings of the 2018 CHI Conference on Human Factors in Computing Systems (CHI '18
影响因子：
--
作者：
Hofmann, Megan;Hann, Gabriella;Hudson, Scott E.;Mankoff, Jennifer
通讯作者：
Mankoff, Jennifer