Polypyrrole nanoparticles fabricated via Triton X-100 micelles template approach and their acetone gas sensing property
Polypyrrole nanoparticles fabricated via Triton X-100 micelles template approach and their acetone gas sensing property
复制标题
通过 Triton X-100 胶束模板法制备的聚吡咯纳米粒子及其丙酮气体传感性能
DOI：
10.1016/j.apsusc.2013.04.132
复制
发表时间：
2013-09-01
影响因子：
6.7
通讯作者：
Chen, Ming
中科院分区：
文献类型：
--
作者：
Li, Fake;Li, Hang;Chen, Ming
以Triton X-100胶束为模板剂，采用软模板法成功合成了聚吡咯（PPy）纳米粒子。聚吡咯纳米粒子已被旋涂在表面声波（SAW）换能器，以证明其对丙酮气体暴露的传感能力。场发射扫描电子显微镜（FE-SEM）和傅里叶变换红外光谱（FT-IR）已被用来表征这些聚吡咯纳米粒子。PPy纳米颗粒的平均直径为95 nm。传感器的响应与丙酮浓度在5.5 ppm至80 ppm的范围内线性相关。在5.5ppm丙酮暴露下，响应时间和恢复时间分别为9 s和8.3 s。用聚吡咯纳米颗粒涂覆的声表面波传感器可能用于检测丙酮。(C)2013 Elsevier B. V.保留所有权利。
Nano-scaled polypyrrole (PPy) particles have been successfully synthesized with the help of Triton X-100 micelles via soft template approach. The polypyrrole nanoparticles have been spin-coated on surface acoustic wave (SAW) transducers to demonstrate their sensing capability toward acetone gas exposure. Field Emission Scanning Electron Microscopes (FE-SEM) and Fourier transform infrared (FT-IR) spectroscopy have been utilized to characterize these PPy nanoparticles. The PPy nanoparticles have an average diameter of 95 nm. The responses of the sensors are linearly associated with the acetone concentrations in the range from 5.5 ppm to 80 ppm. In response to 5.5 ppm acetone exposure, the response and recovery time are 9 s and 8.3 s, respectively. SAW sensors coated with PPy nanoparticles were potentially useful to detect acetone. (C) 2013 Elsevier B.V. All rights reserved.