Effect of back pressure during equal-channel angular pressing on deformation-induced porosity in copper

Effect of back pressure during equal-channel angular pressing on deformation-induced porosity in copper
复制标题

DOI:
10.1016/j.scriptamat.2013.02.034
复制
发表时间:
2013-06
期刊:
影响因子:
6
通讯作者:
Jens Ribbe;G. Schmitz;H. Rösner;R. Lapovok;Y. Estrin;G. Wilde;S. Divinski
Jens Ribbe;G. Schmitz;H. Rösner;R. Lapovok;Y. Estrin;G. Wilde;S. Divinski
中科院分区:
材料科学1区
文献类型:
--
作者:
Jens Ribbe;G. Schmitz;H. Rösner;R. Lapovok;Y. Estrin;G. Wilde;S. Divinski

文献摘要

被引文献

相似文献

研究了等通道转角挤压(ECAP)过程中背压对变形诱导气孔的影响。在无反压条件下,4道次ECAP变形后,试样中出现明显的孔隙,而施加200 MPa反压时,试样中没有出现渗流现象。但当带背压的ECAP变形持续到8道次时,出现了气孔。本文讨论了严重变形材料中的膨胀孔隙的性质。
The effect of back pressure during equal channel angular pressing (ECAP) on deformation-induced porosity is investigated. While percolating porosity was found after 4 ECAP passes in the absence of back pressure, no percolation was detected when a back pressure of 200MPa was applied. However, after ECAP with back pressure continued to 8 passes, percolating porosity did appear. The nature of the percolating porosity developed in severely deformed materials is discussed.