Preparation of Spherical Particles of 1,1-Diamino-2,2-dinitroethene (FOX-7) Using a Micellar Nanoreactor
Preparation of Spherical Particles of 1,1-Diamino-2,2-dinitroethene (FOX-7) Using a Micellar Nanoreactor
复制标题
DOI：
10.1021/op200386u
复制
发表时间：
2012-11-01
影响因子：
3.4
通讯作者：
Kulkarni, Bhaskar Dattatraya
中科院分区：
文献类型：
--
作者：
Mandal, Alok Kumar;Thanigaivelan, U.;Kulkarni, Bhaskar Dattatraya
The need and preparation of spherical 1,1-diamino-2,2-dinitroethene (FOX-7) particles to meet certain special applications in high explosives and propellant formulation have been illustrated. Preparation of spherical FOX-7 particles by using a microemulsion technique has not been reported in the literature. In the present study, the preparation of spherical FOX-7 particles has been described using the novel concept of a micelle-based nanoreactor. Micelle-based nanoreactors have been prepared using a microemulsion of Triton X-100, cyclohexane, and water. Formation of spherical FOX-7 particles in the reverse micelle reactors have been described in the subsequent sections of this article. It is observed that spherical particles of FOX-7 are formed within 2 h in the microemulsion media. Analysis of the experimental results revealed that the particle size and shape of FOX-7 can be varied by changing the water/surfactant molar ratio in the microemulsion. Spherical particles synthesized by this method have diameters that are generally in the submicrometer to nanometer range. Impact sensitivity (h(50)) of the spherical particles obtained by the fall-hammer method is around 45 cm compared to regular synthesized FOX-7 (i.e., 50 +/- 5 cm) without any change in friction sensitivity, i.e. 36 kg. Loadability of the explosive charges can be enhanced by using these spherical particles of FOX-7.
