The behavior of pre-corrosion effect on the performance of imidazoline-based inhibitor in 3 wt.% NaCl solution saturated with CO2
The behavior of pre-corrosion effect on the performance of imidazoline-based inhibitor in 3 wt.% NaCl solution saturated with CO2
复制标题
DOI:
10.1016/j.apsusc.2015.08.003
复制
发表时间:
2015-11
影响因子:
6.7
通讯作者:
Huan-huan Zhang;Xiaolu Pang;Meng Zhou;Chao Liu;Liangtian Wei;K. Gao
中科院分区:
文献类型:
--
作者:
Huan-huan Zhang;Xiaolu Pang;Meng Zhou;Chao Liu;Liangtian Wei;K. Gao
An imidazoline-based inhibitor was synthesized, characterized and tested as a corrosion inhibitor for low alloy steel in CO2-saturated 3 wt.% NaCl solution at 60 °C. The influence of pre-corrosion on inhibition efficiency of the inhibitor was evaluated. The results showed that the inhibitor had excellent inhibition effectiveness on freshly abraded samples, with an inhibition efficiency of 98.7% in the presence of 2.4390 × 10−5mol/l inhibitor. The adsorption of the inhibitor on the steel surface was found to obey Langmuir's adsorption isotherm and chemisorption. Pre-corrosion had a detrimental effect on the inhibitor performance, significant localized corrosion was observed on the pre-corroded samples with 1.2195 × 10−5mol/l inhibitor after 96 h immersion. The differences in inhibition efficiency of the inhibitor for samples pre-corroded for different time were related to the different corrosion products and the increase of surface area after pre-corrosion.