Arc Plasma Reactor Power System with 5-Limb Transformer
Arc Plasma Reactor Power System with 5-Limb Transformer
复制标题
带五柱变压器的电弧等离子体反应堆电源系统
DOI：
10.1515/jaots-2006-0212
复制
发表时间：
2006
影响因子：
--
通讯作者：
H. Stryczewska
中科院分区：
文献类型：
--
作者：
G. Komarzyniec;J. Diatczyk;H. Stryczewska
电弧等离子体反应器特别适用于处理各种工艺过程中排放到大气中的大量废气。它们可以在三相电力系统中运行，可以串联或并联到气流中。它们的正常运行要求供电系统在稳定可靠运行的同时，电离电极间区域，保持点火后电弧放电的循环非平衡运行。特殊结构的变压器是所有电弧放电等离子体反应器电力系统的基本元件。本文介绍了用五肢变压器作为电弧等离子体反应器电源的研究结果。文中还讨论了利用这种变压器的轭中感应电压点火放电的可能性。
Abstract The arc plasma reactors are especially suitable for treatment of big volumes of exhaust gases emitted to the atmosphere during various technological processes. They can operate at three-phase power system and can be connected in series or in parallel to the gas flow. Their proper operation require power supply systems that should ionize the inter-electrode zone and maintain the cyclic and non-equilibrium operation of the arc discharge after ignition while presenting stable and reliable operation. Transformers of special construction are the basic elements of all of arc discharge plasma reactors power systems. Paper presents results of investigation of 5-limb transformer as a power supply for the arc plasma reactor. The possibility to take advantage of the voltage induced in the yokes of this kind of transformer for ignition of the discharge is also discussed.