Effect of Preheat Treatment on the Texture Evolution During Cold Rolling of AA 3003 Aluminum Alloy
Effect of Preheat Treatment on the Texture Evolution During Cold Rolling of AA 3003 Aluminum Alloy
复制标题
DOI：
10.1007/s11665-015-1744-2
复制
发表时间：
2015-10
影响因子：
2.3
通讯作者：
W. X. Wang;M. Ma;H. Li;J. X. Zhang;W. C. Liu
中科院分区：
文献类型：
--
作者：
W. X. Wang;M. Ma;H. Li;J. X. Zhang;W. C. Liu
The effect of preheat treatment on the texture evolution during rolling of AA 3003 aluminum alloy was investigated by x-ray diffraction. The texture evolution during rolling was quantified in terms of a simple relation between the texture volume fractions and true rolling strain. It was found that the alloy annealed at 538 °C had a higher value ofkiand a lower value ofnithan the alloy annealed at 593 °C for all the texture components. The difference in texture evolution between the two preheat treatments was mainly attributed to the initial texture. The alloy annealed at 538 °C had a higher formation rate of β fiber component than the alloy annealed at 593 °C because of the relatively weak cube texture and the presence of the P texture.
