The rise of 3D Printing entangled with smart computer aided design during COVID-19 era.
The rise of 3D Printing entangled with smart computer aided design during COVID-19 era.
复制标题
DOI：
10.1016/j.jmsy.2020.10.009
复制
发表时间：
2021-07
影响因子：
12.1
通讯作者：
Alanazi E
中科院分区：
文献类型：
--
作者：
Nazir A;Azhar A;Nazir U;Liu YF;Qureshi WS;Chen JE;Alanazi E
在当前的大流行期间，全球有七百五十万个航班被取消，这扰乱了个人防护装备、医疗保健设备、原材料、食品和其他必需设备等各类商品的供应链。在此期间，全球对健康和医疗相关产品的需求增加，而由于运输系统的封锁和中断，使用传统制造技术的生产受到影响。这就产生了对地理分散、小型、快速制造单位以及智能计算机辅助设计 (CAD) 设施的需求。 3D 打印技术和开源 CAD 设计的出现使得克服这一需求成为可能。在本文中，我们对 3D 打印技术在大熊猫时代的应用进行了广泛的回顾。我们观察到，3D 打印与智能 CAD 设计相结合有望克服传统制造单位（专门用于医疗和测试设备以及防护装备）的封锁所造成的干扰。我们观察到，有一些简短的通讯、评论、信件、社论和小型评论被汇编和出版；然而，需要进行系统的最新技术审查，以确定 3D 打印、增材制造 (AM) 设计和数字供应链在处理紧急情况和后新冠时代的重要性。我们回顾了 3DP 的各种好处，特别是在流行病等紧急情况下。此外，系统地讨论了一些相关的迭代设计和3DP案例研究。最后，本文重点介绍了有助于控制大流行等紧急情况的领域，并批判性地讨论了需要进一步研究的研究空白，以便在大流行和大流行后的未来时代充分发挥 3DP 的潜力。
During the current Pandemic, seven and a half million flights worldwide were canceled which disrupted the supply chain of all types of goods such as, personal protective gears, medical health devices, raw materials, food, and other essential equipments. The demand for health and medical related goods increased during this period globally, while the production using classical manufacturing techniques were effected because of the lockdowns and disruption in the transporation system. This created the need of geo scattered, small, and rapid manufacturing units along with a smart computer aided design (CAD) facility. The availability of 3D printing technologies and open source CAD design made it possible to overcome this need. In this article, we present an extensive review on the utilization of 3D printing technology in the days of pandamic. We observe that 3D printing together with smart CAD design show promise to overcome the disruption caused by the lockdown of classical manufacturing units specially for medical and testing equipment, and protective gears. We observe that there are several short communications, commentaries, correspondences, editorials and mini reviews compiled and published; however, a systematic state-of-the-art review is required to identify the significance of 3D printing, design for additive manufacturing (AM), and digital supply chain for handling emergency situations and in the post-COVID era. We present a review of various benefits of 3DP particularly in emergency situations such as a pandemic. Furthermore, some relevant iterative design and 3DP case studies are discussed systematically. Finally, this article highlights the areas that can help to control the emergency situation such as a pandemic, and critically discusses the research gaps that need further research in order to exploit the full potential of 3DP in pandemic and post-pandemic future era.
登录
查看更多内容
影响因子：
3.5
作者：
Erickson, Melissa M.;Richardson, Eric S.;Fearis, Paul
通讯作者：
Fearis, Paul
影响因子：
9.4
作者：
Callahan, Cody J.;Lee, Rose;Arnaout, Ramy A.
通讯作者：
Arnaout, Ramy A.
DOI：
10.1016/j.dsx.2020.04.032
发表时间：
2020-07-01
影响因子：
10
作者：
Javaid, Mohd;Haleem, Abid;Vaish, Abhishek
通讯作者：
Vaish, Abhishek
影响因子：
12.1
作者：
Achillas, Ch.;Aidonis, D.;Tzetzis, D.
通讯作者：
Tzetzis, D.
影响因子：
--
作者：
Bateman, NT;Leach, RM
通讯作者：
Leach, RM